The St. Laurent way, written down. This is the crew handbook for St. Laurent Property Maintenance LLC in Hudson, New Hampshire.
Landscape maintenance and snow for 55+ communities, fast-food sites, commercial properties, and residential accounts. Owner: Jake Holden.
We maintain properties so a client does not have to call us back about the visit we just finished. The standard is the same on a condo walk, a restaurant lot, a commercial front, and a residential lawn. Read the topic for the work in front of you. Do that work. Then walk the property before you leave.
Before any truck rollsNo work starts until the crew leader punches the crew in or approves the start. Park in the designated crew pick-up area at the top of the hill by the office.
Open the topic that matches the task. On a phone, use Menu. Search finds a topic by plain words.
Each field guide has the standard, the tools, the checks, the steps, and a Do it right / Avoid this list.
Videos play on the page. They are manufacturer films. The written standard on the page is the St. Laurent way. If a film shows a different fuel can or a different finish, follow this book.
Dashed boxes marked Photo needed are shots the crew still has to take. Stock photos are labeled and are not our machines.
Office / Sales is marked office-only. Crews do not train from that section and do not quote prices from it. There are no pay rates and no customer lists in this book.
St. Laurent Property Maintenance LLC · Hudson, New Hampshire · Edition November 2026 · The St. Laurent way
Field Ops
Day start
The day is ready when the crew leader says it is ready. A turn-back to the shop for tools, fuel, or a missed assignment is the crew leader's failure.
Purpose and standard
Every crew leaves the Hudson yard able to finish the route that is on the schedule. Nobody starts billable work, and nobody leaves the hill, until the crew leader has punched the crew in or has approved the start in person.
[Photo needed: crew pick-up area at the top of the hill by the office, showing the stalls trucks use]
Tools the crew leader has in hand
The day's schedule and the order of stops.
Trucks parked in the designated crew pick-up area at the top of the hill by the office.
Mowers, trimmers, and blowers fueled from the correct can and checked.
Blades, line, bags, rakes, and PPE for the work on that route.
Trailer closed and hitch checked if a trailer is going out.
Steps
Park in the crew pick-up area at the top of the hill by the office. Do not stack trucks at the office door or down the hill.
Crew leader confirms who is on the crew and punches the crew in, or approves the start out loud to that crew. Until that happens, work has not started.
Crew leader reads the route. Tools, fueled equipment, and the right cans are on the truck before anyone climbs in to leave.
Daily equipment checks are done on every machine that will run. A machine that fails a check stays in the yard.
Fuel for the day is already in the equipment. Fuel stops happen at the end of the day. An unplanned stop needs Operations approval before the truck turns off the route.
The company card stays with the person Operations has approved to use it, for the purchase that was approved. Any other use is a serious violation.
Hitch, chains, lights, and trailer door are checked when a trailer goes. Then the crew leaves.
Safety
The hill is a work area with trucks moving. Walk where drivers can see you. Do not stand behind a trailer while someone is backing. Do not ride on a trailer, a mower, or in a truck bed.
Do it right
The crew is punched in or the crew leader has approved the start before the first property.
The truck in the pick-up area could finish the route without a trip back.
Fuel is planned for the end of the day.
Avoid this
Starting because everyone is here, with nobody punched in and nobody approved.
A turn-back for line, a bag, a can, or a stop that was never on the schedule.
Using the company card because it was convenient.
Field Ops
Crew leader
The crew leader owns the crew, the schedule, the machines, and the finish the client sees. Leadership is the work, not a title on the shirt.
Purpose and standard
A St. Laurent crew leader speaks clearly, dresses as the company, keeps the truck presentable, and brings the property to the standard before anyone asks. Call-backs are a miss. The weekly clean-truck photos go to the office. When the crew tows, the crew leader owns the hitch check and who is allowed to drive the enclosed trailer.
Client talk
Be brief and respectful. Explain the work you are doing if a resident asks. If the question is a price, a new service, a complaint about a bill, or a promise about next week, the sentence is: "The office handles that. I will have them call you." Take the name and the request back to the office the same day. Do not invent a number. Do not argue in a driveway.
Uniform and truck
Company shirt, presentable pants, and work boots on every account. The truck that represents the company is cleaned on the weekly photo day: cab clear of trash, bed or trailer swept, no loose cans in the photos. Send the photos to the office the week they are due.
[Photo needed: weekly clean-truck photos — front, driver side, and open cargo area, cab clear]
Steps
Build the day before the crew is waiting: schedule, machines, fuel, line, bags, and PPE.
Punch the crew in or approve the start. Assign who runs which machine.
On site, set the order of work and the height, the bag-or-discharge call, and where debris goes.
Correct the work while you are still there. A missed strip you drive away from becomes a call-back.
You are the person who talks with the client. Keep it on the work in front of you.
Walk the property with the end-of-visit list before the truck moves.
If you are towing the enclosed trailer: coupler latched, pin or lock in, safety chains crossed, breakaway connected where the trailer has one, lights working, door latched, ramps stored. Then drive it. Nobody else drives that trailer unless you have assigned them and they have done the same check.
[Photo needed: enclosed-trailer hitch close-up — coupler, pin, crossed chains, breakaway cable, plug for the lights]
Safety
Stop a job when a person, a car, or a machine is in the wrong place. You do not owe a faster finish to anyone if the safe way is slower. Report an injury the same day.
Do it right
The crew knows the route because you briefed it.
Uniform on, truck photo sent on the week it is due.
You leave a property you would let the office photograph.
Hitch check is done every time the trailer moves, including after a lunch stop.
Avoid this
Hoping the crew "knows how we do it" with no assignment.
Quoting a price or promising a date.
Sending a dirty-truck photo and calling it done.
Rolling a trailer on a latch you did not watch close.
Field Ops
Fall cleanup
A fall cleanup leaves turf you can see, beds that are empty of the leaf mat, and hard surfaces bare. Nothing is piled on the porch or against a door.
Purpose and standard
We take the property into winter looking maintained. Leaves come off the lawn, out of the beds, and off walks, drives, and entries. Debris is hauled the way that account is set up. A leaf pile left against the building is not a cleanup.
Illustration of leaf volume, not our crew and not our site. David Morris, CC BY 2.0, via Wikimedia Commons.
Tools and PPE
Echo blower, rakes, tarps, and the trailer or bags the account uses.
Mower if a final cut is on the schedule. Trimmer for the edges you open back up.
Eye protection, hearing protection, gloves, and boots. High-visibility vest on a road, a commercial drive, or a fast-food lane.
Blue can only. Blowers take mix.
Pre-job checks
Crew is punched in or the crew leader has approved the start. This visit is on the schedule.
Walk the property before the first pull of the starter. Mark toys, hoses, open windows, cars, pets, downspouts, and the door you must keep clear.
Check the wind. Plan the direction so material moves away from the house.
Blower tube is seated. Fuel is mix from the blue can. Guard is on.
Steps
Pick up sticks, trash, and anything a mower or blower would throw. Bag the trash. Do not blow litter into the woods.
Clear the lawn. Rake or blow leaves into rows or onto tarps, working so the stream travels away from the foundation. Start on the windward side when the wind is up.
Clean the beds. Pull leaves out of shrubs, off the mulch, and off the edge. Do not bury a leaf layer and call the bed done.
Clear hard surfaces: walks, drives, pads, and the curb line that is ours. Blow off the property. Keep the stream off the neighbor's finished area.
The porch, the entry, and every door are a hand finish. Blow away from them. Check the mat. Leave it flat and clear.
Haul the leaves. Trailer loads are piled so the door still latches. A curb pile is used only when that account's standard is a curb pile, and it stays out of the travel lane.
If a final cut is scheduled, mow turf you can see. Do not mow a leaf mat into wet clumps. Follow the mowing standard.
Edges and beds get a last look: obvious weeds out, mulch put back on the bed, line off the trunks.
Do the end-of-visit walkaround from the street and from the front door.
[Photo needed: fall cleanup on a 55+ property — turf visible, beds clear of leaves, walk bare, entry clear]
[Photo needed: leaf load in the trailer, piled so the door latches and nothing trails]
Common mistakes
Blowing the whole yard toward the building because that was the easy direction.
Leaving a windrow on the lawn and calling the cleanup finished.
Packing leaves into the shrubs where they are harder to see from the drive.
Mowing first through a deep leaf cover and painting the siding with debris.
Safety
Wet leaves are slippery on walks and on slopes. Hearing and eye protection stay on while the blower or mower runs. At a fast-food site, do not blow across the drive-thru while cars are in it. In a 55+ community, stop for residents on foot. Never point the nozzle at a person, a pet, or an open window.
Watch on this page
This Old House · "Tools to Clear Away Fall Leaves | This Old House." A real how-to for the volume of a fall leaf job. Our haul method and our "away from the house" rule are the standard.ECHO USA · "ECHO PB-580 Backpack Blower: Features Tour." Match the model that is actually on the truck. The direction we blow does not change with the model.
Do it right
Turf is visible. Beds are free of the leaf mat.
Walks, the drive, and the entry are bare.
Leaves were moved away from the house and hauled.
Avoid this
A pile on the porch, against a door, or along the siding.
Debris blown onto a neighbor or into a drive-thru lane.
A trailer that will not latch because the load was stacked past the door.
Field Ops
Mowing a lawn
A St. Laurent cut is even, at the height set for that property, with no clumps, no scalps, and no clippings left on the walk or against the building.
Purpose and standard
We mow with Exmark 60-inch walk-behind mowers and Exmark riding mowers, with baggers on when the property is a bagging site. Discharge stays on open turf that you still have to mow, or it goes in the bagger. It does not go at the house, a car, a window, or a person.
Tools and PPE
The Exmark assigned to you: 60-inch walk-behind or rider. Bagger, tubes, and bags if this site is bagged.
Eye protection, hearing protection, boots with a closed toe, and long pants. Gloves for adjustments after the machine is off and the blades have stopped.
Straight gas from the red can for a gas mower. Yellow diesel goes only in diesel equipment, and only if that machine is diesel. Blue mix is for the trimmers and blowers, not for a mower that takes straight gas.
A blower or rake for the hard surfaces after the cut. The trimmer finishes what the deck cannot reach.
[Photo needed: 60-inch Exmark walk-behind on a St. Laurent lawn — operator position and discharge side visible]
[Photo needed: Exmark rider with bagger — bags, tube, and blower housing latched]
Pre-job checks
Daily oil, tire, and hydro checks are already done. Guards are on. The safety interlock has not been bypassed. If it has, the mower does not go out.
Deck is scraped of yesterday's buildup. Bagger screen is clear. Bags are empty enough to start.
Height of cut is set to this property before the blades come on. Both sides match.
Walk the lawn: toys, rocks, hoses, pet waste, sprinkler heads, low limbs, and people.
You know where the first pass goes so discharge is aimed at open turf, away from the house.
Steps
Set the deck to the property height. Lock it. Do not drop the height in the middle of the lawn to chase a look.
Walk-behind: both hands on the controls, body between the handles, speed you can steer. First pass is the straight line the rest of the lawn will follow, usually the longest clean edge, planned so the discharge is not aimed at the house.
Rider: sit, belt fastened if the machine has one, parking brake released only when you are ready to move. Blades stay off until you are on the grass and the discharge path is clear. No passengers. Ever.
Overlap each pass by a few inches. Watch the uncut edge. A mohawk between passes is a missed strip.
Throw clippings onto grass you still have to mow, or into the bagger. On a bagging site, dump before the tube packs. A full bag throws clumps and loads the Ultra Vac belt. If the belt squeals or slips, stop. Do not finish the lawn on a slipping belt.
Slow down in thick or wet grass. If the deck labors, lower the ground speed. A second clean pass beats a row of clumps.
Go around obstacles with the deck. The trimmer does posts, fences, and the back of the bed. Do not ram the deck into edging, valve boxes, or fence posts.
Turn without tearing the turf. On the rider, use a wide turn. Do not spin a tire in place on a finished lawn.
Blades off before you sit over a walk if the discharge would throw stone. Clippings do not stay on concrete. Blow or sweep them off, away from the porch and the doors, before you call the lawn done.
Shut down to dump bags or clear a chute: blades off, speed at zero, parking brake set, engine off, key out. Wait until every blade and the blower have stopped. Clear a packed chute with a stick or the tool, not your hand.
Look back from the street. Even color, no strips, no scalps, no clippings on the hard surfaces. Then the walkaround.
[Photo needed: a finished St. Laurent cut — even height, crisp overlap, no clumps, sidewalk clear]
Common mistakes
Same direction every visit, laying the grass over and leaving a stripe that is really a lean.
Dull blades tearing the tips white. If the cut looks frayed, the blades are done. Tell the crew leader. Do not keep mowing on them.
Cutting too short in heat or in a dry week. Scalp marks are call-backs.
Mowing wet grass into rows and leaving them.
Driving the rider across a bed to save thirty seconds.
Safety
Read the slope limit on the decal for the machine you are on. If you cannot point to that limit, you do not mow the hill. Mow a slope you can walk with control. No passengers, no riders on the walk-behind, no feet under the deck, no hands in the chute while anything can spin. Fuel with the engine off and cool enough to touch the cap area. Keep people and pets well clear of the discharge. In a 55+ community, stop the blades and let a resident pass. On a fast-food or commercial site, watch the lane and the door. A thrown stone is our responsibility.
The films below are from Exmark. Watch them on this page. Our height, our bagging call, and our shutdown rule are the St. Laurent standard on top of what Exmark shows.
Watch on this page
Exmark Manufacturing Inc. · "Exmark Walk Behind Safety Video (English)." This is the safety film for the walk-behind, including our 60-inch machines.Exmark Manufacturing Inc. · "Exmark Turf Tracer Walk-Behind Mowers." Official look at the Turf Tracer walk-behind platform, which includes the 60-inch deck.Exmark Manufacturing Inc. · "Exmark Lazer Z - Mower Operation and Safety, Part 1." Rider operation and safety. Follow the control layout on the machine you are sitting on.
Do it right
Height set before the blades start, and it matches the property.
Passes overlap. Discharge goes onto turf still to be cut, or into the bag.
Walks and the entry are clear of clippings. The cut looks even from the street.
Engine off and key out before anyone reaches under the deck.
Avoid this
Discharging at the house, a car, a window, or a person.
Running a full bag until the belt slips.
Scalps, mohawks, and clump rows left "because we were behind."
A defeated safety switch, a passenger, or a hand in a moving chute.
Field Ops
Line trimming
The trimmer finishes the cut the deck cannot reach. It does not scar bark, siding, fence panels, or the turf.
Purpose and standard
Every post, fence line, bed edge, valve box, and obstacle on the account is trimmed to the same height as the mowed turf, with a clean collar and no white ring of scalped soil. We use Echo trimmers.
Illustration of trimming stance only. This is not our Echo and not our uniform. Shixart1985, CC BY 2.0, via Wikimedia Commons.
Tools and PPE
Echo trimmer with the shield and the cutoff knife on. Speed-Feed head loaded.
Eye protection, hearing protection, boots, long pants. Gloves when you refuel or reload, engine off.
Mix from the blue can. The correct line diameter for the head, the .095 the head is built for unless that head is marked otherwise.
[Photo needed: our Echo trimmer — shield, cutoff knife, and Speed-Feed head in frame]
Pre-job checks
Shield and knife are on. Harness clips if you are on a loop handle for a long run.
Line is long enough to reach the knife and not so long it whips your legs. Both ends are out.
You have walked the line: windows, cars, brittle siding, shallow irrigation, and people.
Steps
Start on open turf, away from the building, and let the engine settle.
Cut with the tip of the line. The middle of the line scars bark and melts line on concrete.
Keep the head slightly above the soil so you trim grass, not dirt. Match the mowing height.
Around posts and trunks, arc the tip. Do not rest the head against the bark or the fence.
Along a hard edge, turn the head toward vertical and walk a straight line. That is edging. See the edging standard. Do not cut a new trench.
Throttle down near a person, a pet, or a window. Stop and let people pass in a 55+ community.
When the line is short, stop the engine before you reload. Follow the Speed-Feed steps. Do not run the head empty against the obstacle.
Blow the trimmings away from the house and off the walk before you leave that area.
Common mistakes
String marks on a fence or a tree. A scalloped edge because the operator swung instead of walking. Scalped rings at every post. Line melted into a blob because the head was held flat on concrete.
Safety
The head can throw stone and can cut skin. Both eyes covered, both feet planted, no bystanders in the arc. Engine off and the head still before you pick the machine up by the shaft to clear a wrap. Hot muffler stays away from your leg and away from dry leaves piled against it.
ECHO USA · "String Trimmer Fueling and Starting - String Trimmer Basics." Fueling and starting. Our can color is blue for mix, even if the film shows a different jug.ECHO Canada · "ECHO Trimmers How to Use a String Trimmer Product Knowledge Video." Manufacturer product film. The finish standard above is ours.
Do it right
Grass trimmed to mowing height, tip of the line doing the work.
Bark, siding, and fence faces unmarked.
Engine off before a reload.
Avoid this
A dirt ring around every post.
Whipping the head flat against a trunk or a wall.
Trimmings left on the porch side of the walk.
[Photo needed: trim finish around a post and along a bed — no string marks, no scalped soil]
Field Ops
Edging
Edging defines the line that is already there. It does not grow the bed, and it does not cut a new trench into the lawn.
Purpose and standard
Turf meets the bed or the hard surface on a clean line: straight where the walk is straight, and following the bed where the bed was built. We edge with the Echo trimmer held nearly vertical unless a visit is specifically assigned a different tool. We do not reshape an account with the string.
Tools and PPE
The same Echo trimmer, shield, eye and hearing protection, and boots as line trimming. A blade edger is used only when the crew leader has put that tool on the visit. Most visits are string.
Pre-job checks
You can see the existing edge. If it is buried, find it before you cut.
Irrigation heads and valve boxes are spotted so the line does not take them.
Line is fresh. A short stub digs a groove.
Steps
Stand so you walk forward along the edge, not so you swing across it.
Tip the head toward vertical. Let the tip of the line kiss the hard surface or the existing soil line.
Keep a steady pace. The line should look like one cut, not a series of bites.
At corners, pause, reset your feet, and leave the corner square if the concrete is square.
Do not cut deeper than the existing edge. Soil you kick onto the walk gets blown or swept back off, away from the door.
Bed edges that have migrated get reported to the crew leader. You do not invent a new curve on your own.
Common mistakes
Widening the bed a half inch every visit until the shrub sits in a crater. Wavy sidewalk lines. Nicking the concrete edge and painting a white scar. Cutting the plastic edging into pieces.
Safety
Vertical string throws debris along the walk. Eye protection stays on. Watch for residents and for cars overhanging a drive. Stop the engine before you move from one island to another across a lane.
Do it right
One clean line on the edge that was already there.
Walk and turf both free of the soil you loosened.
Corners match the concrete.
Avoid this
A new trench.
A wider bed than you found this morning.
A scalloped line from swinging the head.
[Photo needed: sidewalk edge after string edging — straight, shallow, soil blown off the concrete]
Field Ops
Blowing
Blow away from the house. Never toward the porch, the entry, or the doors.
The blowing rulePoint the nozzle so debris travels away from the building. The porch, the mat, and every door are cleared by blowing outward, then checked by eye. A blast into an entry is a failed visit.
Purpose and standard
Blowing is the last visible pass on hard surfaces and the way we move clippings and leaves off walks, drives, pads, and curbs. Echo blowers, handheld or backpack, follow the same direction rule. The surface should look bare, and the entry should look like nobody worked there.
Tools and PPE
Echo blower with the full nozzle on. Tube clicked in, not taped.
Eye protection, hearing protection, boots. Dust mask if the site is dry and dusty and you need it to see.
Blue can. Mix only.
Pre-job checks
Nozzle and tubes are seated. Throttle returns to idle when you let go.
You know where the debris will land: turf you can then clear, a tarp, or the trailer. Not a door.
Windows, garage doors, and car windows near the work are noted. Open windows mean you change the plan.
Steps
Start with the nozzle pointed away from the building and away from people.
Work from the house outward. First pass clears the band of walk or patio closest to the wall, blowing that material farther into the open.
Corners of an entry are a short, controlled pass aimed out, then a look. Do not pack debris into the threshold.
Mats get a light pass from the house side toward the walk, then you straighten the mat.
Cars: blow past them, not under the door seals and not at the paint from a foot away. Better to skip a tight gap and broom it.
Beds: do not empty the mulch onto the lawn. If the nozzle is lifting mulch, you are too close or too high on the throttle. Rake mulch back.
Fast-food and commercial lanes: hold the blower until the lane is clear, or blow parallel to the curb into a spot that is not the drive path. Never blow at the customer door.
Finish by walking the entry. If you can see clippings in the corner of the door, you are not done.
Common mistakes
Starting at the curb and blowing the whole walk at the front door. Blowing mulch out of a fresh bed. Leaving a pile on the welcome mat because the rest of the walk looked good. Blowing trash into the street.
Safety
Nozzle stays off skin, off faces, and off animals. Hearing protection on. Dust in a commercial lot means you watch traffic while you work, not just the nozzle. Do not run the blower from a ladder. Hot air from the muffler stays off your arm and off dry leaves stacked against a wall.
ECHO USA · "ECHO Blowers - Product Knowledge." Manufacturer overview. Our direction rule is not in the film. It is on this page.ECHO USA Support · "Install PB-251, PB-255, and ES-255 blower tube." How the tube locks on. A loose tube is not a shortcut.
Do it right
Every pass moves debris farther from the house.
Porch, mat, and doors are clear when you look back.
Mulch is still in the bed. The walk is bare.
Avoid this
Blowing toward the porch or a door.
Blasting an open garage, an open window, or a customer entrance.
Leaving the pile at the threshold because the curb looks clean.
[Photo needed: front entry after blowing — debris moved away from the door, mat flat, corner of the threshold empty]
Field Ops
Bed maintenance and weeding
A bed looks tended. Weeds are out, plants are intact, and the mulch is still in the bed.
Purpose and standard
We weed by hand. Obvious weeds come out by the root when the soil allows: crabgrass in the mulch, dandelions, and tree seedlings. If you cannot tell a weed from a planting, leave it and ask the crew leader. We do not spray. If a bed needs a treatment, the office schedules that visit on purpose.
Tools and PPE
Gloves, a weeder or knife, a bucket or tarp for the weeds, and eye protection when you are working under shrubs. The trimmer is not the weeding tool inside a bed.
Pre-job checks
You know which beds are in the visit. Groundcover stays. It is not a weed.
Irrigation drip lines are visible before you dig.
The crew leader has told you if this account has plants that look like weeds and are not.
Steps
Pull weeds you know, grip low, and get the root. Shake the soil back into the bed.
Pile weeds on a tarp, not on the lawn and not on the walk.
Rake or hand-place the mulch back over the spot you opened. No dirt smears on the edge.
Leaf litter and trash come out in the same pass.
Look at the plants. Broken branches from our trimmer get cleaned with a proper cut back to a collar if you are sure of the cut. If you are not sure, tell the crew leader rather than pruning blind.
Haul the weeds off the property with the rest of the debris.
Common mistakes
Pulling groundcover. Leaving roots that resprout by next week. Smearing mud across the sidewalk. "Weeding" with the trimmer and skinning the shrubs.
Safety
Watch for yellowjacket holes, thorny wood, and irrigation stakes at knee height. Gloves on. Do not reach where you cannot see. In condo courtyards, do not block a unit door with the tarp.
Do it right
Weeds out, roots included, soil shaken back.
Mulch replaced. Walk clean.
Plantings left alone when you are not sure.
Avoid this
Spraying anything on a normal maintenance visit.
Stripping a groundcover bed.
A bucket of weeds left at the end of the drive.
[Photo needed: bed after weeding — open soil covered again, weeds on a tarp, edge clean]
Field Ops
Mulching
Mulch covers the bed in an even layer, stays off the trunks, and stays off the lawn and the siding.
Purpose and standard
The St. Laurent depth is about two inches of cover across the bed. Pull mulch back a few inches from trunks and shrub stems. Keep it off the foundation and the siding. Keep it off the walk. If an account uses a different depth, the crew leader has that number before the load is dumped. We do not build mulch volcanoes.
Illustration of bark mulch in a bed, not a St. Laurent account. Z3lvs, CC0, via Wikimedia Commons.
Tools and PPE
Forks or shovels, rakes, tarps, a wheelbarrow, gloves, and boots. Eye protection when you are throwing forks of mulch. Blowers only for the hard-surface cleanup after, on low speed, aimed off the bed.
Pre-job checks
Beds are weeded and edged first. Mulch does not hide weeds.
The product on the truck is the product for this account.
Tarps are down where a dump would stain a walk or bury a finished lawn edge.
You know the snow-shelf and the drain locations so you do not bury a drain.
Steps
Weed and edge. Confirm depth with the crew leader if the bed already has a thick layer. Adding two inches on top of four inches is too much.
Place piles around the bed so you are raking a short distance, not dragging across the lawn all afternoon.
Spread with a rake to an even two inches. Knock mulch out of the plants.
Pull the mulch back from trunks, stems, and the foundation. You should see the flare of a tree, not a cone of mulch.
Sweep or blow hard surfaces clean, blowing away from the house. A stained walk gets swept until the film is gone.
Haul the tarps and the empty bags. Look at the bed from the street.
Common mistakes
Volcanoes around trees. Mulch piled against vinyl siding. A half-finished pile "for next week." Dyed mulch tracked through a garage entry. Burying perennials and the drip line.
Safety
Lift from the legs when you move wet mulch. Do not pitch a fork toward a partner. Watch for residents walking through a condo courtyard while you have tarps on the walk. Keep a path to each door.
Do it right
About two inches, even, weeded underneath.
Trunks and stems clear. Siding clear.
Walks swept. No pile left behind.
Avoid this
A mulch volcano.
Mulch on the lawn, the walk, or against the house.
Covering weeds instead of pulling them.
[Photo needed: mulch pulled back from a trunk — flare visible, about two inches in the open bed, none on the grass]
Field Ops
End-of-visit walkaround
The visit is finished when the property looks finished. We do not create call-backs.
Purpose and standard
Before the truck moves, the crew leader walks the property the way a client walks it: from the street, and from the front door. Anything you would not want in a photo gets fixed now. A call-back means we missed this list.
Steps
Turf: no missed strips, no clumps, no scalps, no mower ruts.
Trim and edge: posts, the back side of fences, gate openings, and the bed line.
Beds: weeds you walked past, mulch on the grass, plants hit by line.
Hard surfaces: walks, drives, stoops, curb. Clippings and soil are gone.
Porch and doors: nothing piled at the threshold. Mats flat. Debris is not sitting in the corner of the entry. You blew away from the house.
Details that make a 55+ or residential client call: a hose moved and not put back, a gate left open, a toy that was run over, a light fixture packed with clippings.
Fast-food and commercial: the customer door, the drive lane, and the front curb are clear enough for the next car.
Our mess: line scraps, bottles, cups, and empty fuel jugs are on the truck, not under a shrub.
Equipment: ramps up, trailer door latched, mower blades off, no can left on the lawn.
Crew leader looks once from the street. Then you leave. Notes for the office go through the crew leader. You do not text the client a promise.
Safety
Do the walk with the machines off so you can hear a resident and see the real finish. Do not back the trailer while someone is still walking the blind side.
Do it right
You can stand at the front door and at the street and see a finished property.
Gates are as you found them. Hoses are back.
The truck leaves once.
Avoid this
"We'll catch it next week" on a strip you can see today.
A call-back for clippings on the porch.
Leaving while the crew leader is still on another part of the site and has not looked.
[Photo needed: end-of-visit view from the street and from the front door of a finished account]
Equipment & Safety
Fleet and fuel cans
The right machine and the right can. Color is the rule. Memory is not.
The fleet
Exmark 60-inch walk-behind mowers, with baggers.
Exmark riding mowers, with baggers.
Echo trimmers and Echo blowers.
Use the machine the crew leader assigned. Do not swap a mower mid-route because you prefer the other seat. If a machine is tagged out, it stays tagged out.
Fuel cans
BLUEMix. Trimmers and blowers.
REDStraight gas. Gas mowers.
YELLOWDiesel. Diesel equipment only.
Can colorsBlue is mix. Red is straight gas. Yellow is diesel, and yellow goes only into diesel equipment. If the can color and the contents do not match, do not use it. Tag it and tell the crew leader.
Steps
Identify the machine: two-stroke handhelds take mix from blue. Gas mowers take straight gas from red. A diesel machine, if one is on the job, takes yellow, and nothing else takes yellow.
Set the can down, read the color in daylight, then open it. Do not pour from a can you grabbed by feel.
Pour with the engine off. Keep the nozzle out of the dirt. Wipe a spill before you start.
Mix is mixed to the oil ratio on the oil bottle Echo specifies for that equipment. Do not invent a richer mix "so it lasts." The film below is Echo's mixing method. Our can, after you mix, is the blue one.
Fuel the fleet at the end of the day so the morning truck is ready. A fuel stop that was not planned needs Operations approval first.
The company card pays for approved fuel and approved purchases only. Any other use is a serious violation.
[Photo needed: blue, red, and yellow cans side by side in daylight, labels readable, caps on]
ECHO Canada · "ECHO Pro-Tip: Mixing Fuel and Oil for Power Tools." Use Echo's mix method. Store the result in the blue can. The color code is ours.
Do it right
You can name the color before you pour.
Yellow never goes in a gas mower, a trimmer, or a blower.
Cans are capped, upright, and off the lawn when you leave.
Avoid this
A mystery jug.
Straight gas in a two-stroke, or mix in the mower.
A card swipe that Operations did not approve.
Equipment & Safety
Daily equipment checks
Oil, tires, and hydro, every day, before the machine works. A mower that was not checked does not leave the hill.
Purpose and standard
The crew leader owns machines that are ready. Each operator checks the machine they will run. The Exmark maintenance films at the bottom of this page are the manufacturer's series. If a step on a film and the manual for your serial number ever disagree, the manual and the decal on that machine win. Our daily three do not get skipped on a short day.
Pre-job checks
Machine on level ground, engine off, blades stopped, key out, parking brake set, and the engine cool enough that you are not burning yourself on the dipstick tube. No loose clothing near a belt you are only looking at.
Steps
Oil. Pull the dipstick, wipe it, seat it the way that engine requires, and read it. The level sits between the add mark and full. Add only the oil specified for that engine. Do not overfill. If it is suddenly low and it was full yesterday, look for a leak and tag the machine out.
Tires, including the caster wheels. Look at every tire for low pressure, cracks, and a wheel that is not seated. Low air changes the cut and the tracking. Set pressure to the number on the machine's decal, not by kicking the tire.
Hydro. With the machine level and cold, read the hydro oil the way that model shows it, sight or stick. Look under the pumps and the wheel motors for a wet line or a drip. A leak grounds the mower. You do not "watch it for the day."
While you are there: blades not bent, belt covers on, bagger latched, fuel cap tight, no fuel smell at the carb, controls that return to neutral, and a safety system that has not been tied back or unplugged.
Tell the crew leader what you found before you load a bad machine. Write it the way your crew records yard issues so the next person does not reload it.
[Photo needed: daily check points on our Exmark — dipstick, a drive tire with the pressure decal, hydro sight or stick]
Safety
Key out. If you must crank the engine to confirm a neutral return, everyone is clear of the deck and the discharge first, and you are in the operator position. Never reach under a deck to feel a blade as a check. Look from the side with the engine off.
Exmark's four-part Lazer Z maintenance series plays below. Use it to see how the factory walks through service. Parts of the series go past a daily check. Do not turn a daily check into a teardown in the parking lot.
Exmark Manufacturing Inc. · "Exmark Lazer Z - Maintenance Tips, Part 1."Exmark Manufacturing Inc. · "Exmark Lazer Z - Maintenance Tips, Part 2."Exmark Manufacturing Inc. · "Exmark Lazer Z - Maintenance Tips, Part 3."Exmark Manufacturing Inc. · "Exmark Lazer Z - Maintenance Tips, Part 4."
Do it right
Oil, tires, and hydro checked on level ground with the key out.
A leak or a low reading stops the machine in the yard.
The crew leader hears about it before the truck is loaded.
Avoid this
"It was fine yesterday" as the whole check.
Overfilling the oil or the hydro.
Bypassing a safety switch so a dead machine will run.
Equipment & Safety
Ultra Vac belt change
A bagger that slips, squeals, or throws clumps is a belt problem until you prove it is not. Change the belt in the yard, with the engine off, on the routing that belongs to that machine.
Purpose and standard
Ultra Vac belts get looked at on the service interval in that machine's manual, and any time the belt is cracked, glazed, frayed, or slipping. The new belt is the belt listed for this serial number. A 60-inch deck does not wear the same belt as a 52 or a 72. The belt-routing decal on the mower is the picture you follow. This page is the St. Laurent sequence. It does not replace the manual in the machine's packet.
Tools and PPE
The correct belt, gloves, eye protection, and the wrench size the belt guide uses if you have to move the guide. A phone photo of the old routing before you take it off, if the decal is faded.
[Photo needed: Ultra Vac belt routing on our 60-inch machine, cover off, decal in the same photo]
Pre-job checks
Level ground. PTO off. Parking brake set. Engine off. Key out of the switch and in your pocket. Blades and blower stopped. Sheave cool enough to work around.
The belt in your hand matches the parts list for this serial number, not the belt from the other mower.
Nobody else is at the controls.
Steps
Photograph the belt path if you cannot read the decal: impeller sheave, fixed idler, spring-loaded idler, belt guide, and the upper groove of the deck sheave.
Remove the belt cover. Keep the knobs in a pocket, not in the grass.
Pull the idler release and walk the old belt off the deck sheave. Note which groove it occupied. On these decks the blower belt uses the upper groove.
Move the belt guide only if you need the room. Put it back before you call the job done. A belt without its guide walks off.
Route the new belt the way the decal shows. On the large-deck arrangement, the belt goes over the impeller sheave, then you pull the spring-loaded idler and seat the belt in the upper groove of the deck sheave.
Reinstall the belt guide and the cover. The cover sits under the lips that hold it and the knobs are tight. A missing cover is not "for the afternoon."
With every guard on, run the blades and the blower for about two minutes. Shut down, key out, cover off, and look: the belt rides near the center of the flat idler. If it rides on the edge, stop. Do not bend linkage as a guess in the field. Tag it and bring it to the crew leader.
Hands, feet, and tools stay out of the blower opening and out from under the deck the whole time.
Common mistakes
The belt from a different deck width. The belt in the blade groove instead of the upper groove. Cover left off. Calling a squeal "dust" and mowing the rest of the route. Running a belt that walks off the idler.
Safety
A blower impeller will take a finger. The engine is off and the key is out before the cover comes off, and it stays out until the cover is back on. Let the sheave cool. Do not lift the blower assembly alone if it is still mounted and heavy. Get a second person.
Exmark Manufacturing Inc. · "Lazer Z E-Series with UltraVac Collection System | Exmark." Factory look at the UltraVac bagger. Belt replacement still follows the decal and the steps above.Exmark Manufacturing Inc. · "What Makes Exmark Belts Different." Why the replacement belt is an Exmark belt matched to the machine, not a lookalike from the drawer.
Do it right
Key in your pocket, cover off only while you work.
Routing matches the decal. Guide and cover go back on.
A two-minute run, then a look at the idler, before the mower goes on a lawn.
Avoid this
Guessing a belt by length.
Leaving the cover off for "just this site."
Fingers in the blower opening to feel if the belt is on.
Equipment & Safety
Echo trimmer head
Reload the Speed-Feed without taking it apart. Swap the whole head only when the head is worn or the wrong one is on the shaft.
Purpose and standard
Echo Speed-Feed heads reload in the field: line through the eyelets, wind the knob, go back to work. A head whose eyelets are worn through, or a head that will not hold line, gets swapped. The shield and the cutoff knife stay on the machine either way.
Tools and PPE
The right diameter line, usually .095 as the head is marked. Gloves. Eye protection. For a head swap, the locking pin or tool that holds the gearcase shaft, and the head that matches the shaft: the LH head for our straight-shaft trimmers. Engine off for both jobs. For a swap, pull the spark-plug boot as well.
[Photo needed: Speed-Feed head with the load arrows lined up on the eyelets, shield still on the shaft]
Reload steps
Engine off. Head stopped. Set the trimmer down so the head is in reach and the muffler is not on your arm.
Cut a clean end on the line. Use about 15 to 20 feet, not more than the head's capacity. More line jams the head.
Turn the top knob until the arrows line up with the eyelets.
Push one end in an eyelet and out the other side. Pull it even, half the length on each side.
Hold the head still. Wind the knob clockwise until about 5 inches of line sticks out on each side.
Tug both ends together. They should hold. Start the trimmer and let the cutoff knife trim the line to length. Bump to feed at full throttle, tapping the knob, not at idle.
Head swap steps
Engine off. Spark-plug boot off. Shield stays on the gearcase. You are changing the head, not removing the guard.
Lock the output shaft with the locking tool in the gearcase. Do not shove a screwdriver into the wrong hole.
Spin the old head off. On the straight-shaft LH Speed-Feed, the published install direction is counter-clockwise to tighten, hand tight. Confirm you have the LH head before you thread it. The curved-shaft head is a different part. The wrong direction will damage the stud.
Thread the new head on by hand until it is seated. Remove the locking tool. Put the plug boot back on.
Confirm both eyelets, the arrows, the shield, and the knife. Load line with the reload steps. Test in open turf.
Common mistakes
Overfilling the head. Forgetting to line the arrows up, then forcing line. Winding the wrong way. Running with one end missing so the head vibrates. Taking the shield off to make the swap easier and leaving it off.
Safety
A trimmer head can spin if the engine is hot and you bump the starter. Engine off means the switch is off and, for a swap, the plug boot is off. The cutoff knife is sharp. Do not test the line length with your finger.
ECHO USA · "ECHO Speed-Feed Trimmer Head: How It Works." Official film of the head we use.ECHO Canada · "How To Load A Speed-Feed Trimmer Head!" A short reload from Echo's tech team. Eyelet, line through, wind.
Do it right
Arrows on the eyelets, line even, about 5 inches out, shield on.
A worn head is swapped, not nursed through the week.
LH head, hand tight, locking tool removed before you start.
Avoid this
A head packed so full it will not turn.
The wrong head forced onto the stud.
Working the head with the engine running.
Equipment & Safety
PPE and jobsite safety
Eyes, ears, and boots are part of starting the machine. If the protection is in the truck, you are not ready.
The standard
Eye protection on for mowers, trimmers, blowers, and any time material is moving.
Hearing protection on for those same machines. Earbuds are not hearing protection.
Boots with a closed toe and a tread. Long pants. Company shirt.
Gloves for fuel, for blades when the machine is off, for weeding, and for mulch. Gloves come off if they are the loose kind that can catch a spinning head. Do not wear a hoodie string near a trimmer.
A high-visibility vest when you are in a road, a commercial drive, or a drive-thru lane.
On the property
Walk it before you start. People, pets, cars, toys, and low branches.
In a 55+ community, expect residents on foot and in carts. Stop the machine and let them pass. Do not make them walk into the street.
On a fast-food site, the lane and the door stay usable. You do not own the drive-thru.
Slopes: follow the degree limit printed for that mower. If the hill feels wrong in your feet, it is wrong. Do not side-hill a machine past what you can stop.
No passengers on a mower. No riders in a truck bed or on a trailer. No horseplay with a blower.
Heat and cold are part of the job in New Hampshire. Water in the warm months. Layers that still let you run a machine in the snow. Stop if you are not fit to control the equipment and tell the crew leader.
An injury is reported to the crew leader the same day, including the ones that seem small.
Exmark Manufacturing Inc. · "Tips for Lawn Mower Safety and Operation | Exmark." Factory safety film. Our PPE list still applies on the trimmer and the blower.
Do it right
Protection on before the engine starts.
People are clear of discharge, nozzles, and blades.
A machine you would not put your own crew on does not go out.
Avoid this
Safety glasses on the dash.
A passenger "just across the lot."
Working a slope you have not checked against the decal.
Snow Operations
Snow overview
Snow changes the tools. It does not change who is in charge, or the rule that we leave a property a resident can use.
Illustration of a sidewalk being cleared. Not our crew and not our equipment. Sikander, CC BY-SA 4.0, via Wikimedia Commons.
Purpose and standard
We clear the walks, entries, and drives the account includes, for 55+ communities, fast-food sites, commercial lots, and residential stops. Operations and the crew leader set the route and the start. Crews do not freelance a property because the snow looks deep. You do the role you are assigned.
Shoveler clears walks, stairs, and entries by hand.
Shovel crew lead runs that crew the way a summer crew leader runs a mow crew.
Snow Wolf is the plow attachment, run by an operator assigned to it.
Sanders are for the most experienced operators only.
Day-start rules still apply. No one works until the crew leader punches the crew in or approves the start. Park at the top of the hill in the crew pick-up area. Fuel is planned. An unplanned stop needs Operations approval. The company card rule does not relax because it is 2 a.m.
Where the snow goes
Onto the shelf the account uses. Not against siding, not on a shrub bed, not in front of a hydrant, not across a mailbox, and not in front of a unit door. In a 55+ community a blocked door is an emergency for the person inside. At a restaurant, the customer door and the drive-thru stay usable while you work, or you stage the work so they can.
Do it right
You are in the role you were given.
Entries open. Walks are the full width.
Snow is on the shelf, not on the plants or the doors.
Avoid this
A new operator on a sander because the route is long.
Pushing snow into a door to make the lot look open.
Leaving without the shovel lead or the crew leader looking.
Snow Operations
Shoveler
You clear the places a plow should not touch: stairs, narrow walks, entries, and the last foot in front of a door.
Purpose and standard
Walks are cleared to the width a person can use, full width of the walk unless the crew lead has set a different opening width for a heavy storm. Stairs are cleared tread by tread, and the handrail is free of a ridge of snow. The surface is down to pavement when the account is a bare-pavement account. If it is a pack-and-treat account, the shovel lead will say so before you start. You do not decide that in the driveway.
Steps
Gear on: boots with tread, gloves, layers you can move in, and a shovel that is not broken. Eye protection when you are chipping ice.
Start at the door and work out, so the person inside is not looking at a finished walk and a buried threshold.
Throw snow onto the shelf, not back onto a walk you finished, not onto a car, and not against the door.
Stairs: full tread, edges you can see, rail clear. Do not leave a single cleared strip down the middle of a wide stair.
Chip ice you can chip. Mark or report ice you cannot, so the sander or the lead can treat it. Do not walk away from glare ice at a 55+ entry.
Salt and sand stay on the walk, not in the bed. Follow the lead on whether this door gets treatment.
Look back from the door. Then tell the shovel lead you are done with that building.
Safety
Lift with your legs and switch sides before one shoulder is done. Watch the plow and the Bobcat. They have blind sides. Do not step behind a truck that is backing. If you cannot feel your feet, tell the lead and warm up. Pride is how people get hurt at 4 a.m.
Do it right
Door first, then the walk, full width.
Snow on the shelf. Ice reported if you cannot clear it.
You stay where the operator can see you.
Avoid this
A goat path down the middle of the walk.
Snow thrown against the door you just cleared.
Leaving glare ice at an entry because the rest of the walk looked white and flat.
Snow Operations
Shovel crew lead
You run the people on foot. The buildings are done when you have looked, not when the last shovel hit the truck.
Purpose and standard
The shovel crew lead assigns buildings, checks entries, and keeps shovelers out of the path of the plow, the Bobcat, and the truck. You are the voice if a resident comes out. Same client rule as summer: no prices, no promises, "the office will call." Punch-in or your approval still starts the work.
Steps
Confirm the crew is punched in or you have approved the start. Assign who is on which building and where the shelf is.
Say whether the account is bare pavement or pack-and-treat before the first door.
Keep a head count when machines are moving through the site. Pull people off a walk before the plow comes down it.
Check doors, stairs, and the path to the mailbox or the dumpster if that path is part of the account.
You decide who is ready to be near a machine. A new shoveler does not get handed a sander.
Walk the entries the way the summer walkaround works. Then release the crew.
Safety
If you cannot see all of your people and the lot is full of moving equipment, stop the equipment or stop the walking until you can. Fatigue is part of a storm. Rotate the heavy stair buildings.
Do it right
Every person has a building and a shelf.
You looked at the doors yourself.
Machines and shovelers are not in the same blind spot.
Avoid this
Sending the crew out while you stay in the truck for the whole site.
Letting a resident's request change the route without Operations.
Putting an unsigned operator on the sander to save a stop.
Snow Operations
Truck operator
You move the crew and you move snow with the truck. The lot is not a reason to drive faster than you can stop.
Purpose and standard
The truck operator owns a clear windshield, working lights, and a truck that is legal to drive in the storm before it leaves the hill. If you are plowing with the truck, the blade is the tool, not a bumper. If you are towing the enclosed trailer, the crew leader's hitch standard applies every time you hook back up, including after fuel.
Steps
Before you roll: windshield, wipers, defroster, lights, tires, and fuel enough for the route you were given. Mirrors clear of ice.
No one in the bed. No one on the plow frame. Passengers go in seats and wear belts.
Blade up to travel, including when you back, unless you are plowing in reverse on purpose and you can see the whole path.
Stack snow on the shelf. Do not plug an entrance, a hydrant, a mailbox, or a drive lane the client has to use at dawn.
On a fast-food lot, watch the drive-thru geometry. A windrow across the lane is a failed pass.
Fuel at the planned time. An extra stop needs Operations. The card rule stands.
When the truck is parked, put the blade down on level ground unless the crew leader has a different park rule for that truck. A raised blade that can drop is not left over a walk.
Safety
If you cannot see, you stop and clean the glass. Backing happens with a spotter when shovelers are on the site. Chains and the hitch get a look every time, not just at the shop.
Do it right
Glass, lights, and blade checked before the hill.
Snow stacked where the lead showed you.
Spotter in place when people are behind you.
Avoid this
A blind reverse with shovelers on the lot.
A windrow across a door or a drive-thru.
Skipping the hitch check because you "just unhooked for a minute."
Snow Operations
Skid steer operator (Bobcat)
The Bobcat moves volume. It also knocks corners off buildings when the operator rushes. This seat is assigned, not taken.
Purpose and standard
The skid steer operator clears lots and wide drives, stacks snow on the shelf, and stays off beds, heat pumps, porches, and parked cars. Seat belt and the lap bar are down before the machine moves. Windows you cannot see out of get cleaned before the next pass.
Steps
Walk around the machine: attachment pins, hoses, lights, glass, and the path off the trailer. Hitch and ramps follow the trailer standard.
Belt on, bar down, people clear, then start. Travel with the attachment low.
First pass opens a lane the truck and the residents can use. Then widen. Do not bury the cars you are trying to free.
Push to the shelf. Leave a gap at the building so melt water and the next storm have somewhere to go that is not the siding.
Slow at corners, columns, and the drive-thru menu board. Those are call-backs we cannot fix with a shovel.
If a person walks into the work area, stop. The bucket stays down until they are clear and you have seen them.
Park on level ground, attachment down, brake set, key handled the way the crew leader set for that storm.
Safety
The rear swings. Shovelers stay where you can see them, or you do not move. Do not lift a load of snow over a walk where people are. Exit the way the manual says, facing the machine, three points of contact, not a jump from the step.
Bobcat EMEA · "Trainer's Tips & Tricks: Bobcat Snow Blade." A Bobcat trainer film. Controls follow the decals in our cab if they differ from the film.
[Photo needed: Bobcat snow stack on a commercial lot — off the building, off the beds, door still open]
Do it right
Belt, bar, and clean glass before you move.
Stack off the building and off the landscaping.
You stop when a person enters the area.
Avoid this
A racing lap around a condo building.
Snow piled on a heat pump or a porch.
Operating with a window packed in ice.
Snow Operations
Snow Wolf
The Snow Wolf is a plow, not a push box you figure out on the first pass of a storm. You are assigned to it, and the pins are in before the blade moves.
Purpose and standard
Operators assigned to the Snow Wolf angle the blade so snow goes to the shelf, float the blade so it does not gouge the lot, and keep the windrow out of traffic, out of the drive-thru, and out of storefront doors. Hydraulics are seated. Nobody stands at the blade while you angle it.
Steps
Confirm the mount: coupler or pins fully seated, locks in, hoses connected and not hanging in the blade path, cutting edge present.
Test angle and lift in an open part of the yard with everyone clear.
Float the blade on the pavement. If it chatters or digs, stop and reset. A gouged lot is our repair.
Angle toward the shelf. On a street portion, angle so you are not throwing snow into oncoming lanes.
At a fast-food or retail door, make a pocket so customers can get out, then push the volume away from the building.
Watch edges, drains, and parking blocks. Lift for them. Do not catch a drain grate and keep driving.
At the end of the push, the blade is down or stowed the way that machine is parked, pins still in, hoses secured before you road the truck.
Safety
Treat the blade as wider than it looks in the mirror. Check the wings or the ends before you pull next to a car. Hydraulic fluid on a fitting means you stop, not tighten it while it is under pressure with your face over it.
SnowWolf · "SnowWolf Snowplows - Clear the Way." Manufacturer overview of the plow. Our mounting check and our shelf rule are the operating standard.
[Photo needed: Snow Wolf on our machine — pins or coupler locked, blade down, shelf identified in the background]
Do it right
Locks in, hoses clear, people away from the blade before you angle.
Blade floating, snow aimed at the shelf.
Doors and the drive lane still work when you leave.
Avoid this
A pin "mostly" in.
Gouging the asphalt to get the last streak.
Throwing a windrow through a storefront or across a live lane.
Snow Operations
Sanders
Sanders are for the most experienced operators. This is not a seat you learn on a storm night.
Who runs a sanderOnly an operator Operations has signed off. If your name is not on that list, you do not open the hopper, you do not ride along "to learn the switches," and you do not get handed the route because the crew is short.
Purpose and standard
The signed-off operator applies material where the account calls for it: walks, entries, and lots that are part of the visit. The spread setting is the one the crew leader gave you for that account. Too much burns turf and concrete and leaves a white mess with our name on it. Too little is glare ice and a call-back. Material stays out of the beds and off a pile on the door mat.
Steps
Confirm you are signed off for this sander. Confirm the setting and the stops before you leave the yard.
Inspect the hopper, the spinner or the drop, the lights, and the cover. A clog gets cleared in the yard with the spinner stopped and the truck in park, not while you creep a lot.
Cover the load. Material that blows out on the road is wasted and it is a hazard behind you.
Apply on the surface you were given. Keep the pattern off shrub beds and off the lawn edge.
Entries get a useful scatter, not a pile in front of the mat. The shoveler and the sander should not undo each other. The lead sets who goes last.
Watch the rate. If the pattern looks heavier than the setting you were given, stop and correct it. Do not "finish the hopper" on the last driveway.
At the end of the night, clean the chute so the next start works. Note what you used so the yard can reload. Park it. The next operator inherits a machine, not a puzzle.
Safety
Spinner off before anyone reaches in. Never clear a jam with the truck in gear. Material in your eyes means you stop and rinse, not squint through the rest of the route. Other drivers on a treated hill still cannot stop. Leave yourself room.
[Photo needed: sander controls and the clean-out point, photographed for operators who are signed off]
Do it right
Signed-off operator, setting confirmed, cover on.
Pattern on the pavement, light at the door, none in the bed.
Chute cleaned before the truck is done for the night.
Avoid this
A new operator "just this once."
Emptying the hopper on the last lot.
A pile of salt on a mat or in a mulch bed.
Office / Sales
OFFICE ONLY This section is for the office and for sales. It is not crew training. Crews do not use this section on the job, and nothing in this book lists pay, prices, or customers.
Office standards
The office builds the week the crew leader runs. Changes move through Operations, not through a text from a resident to whoever is holding a trimmer.
Purpose and standard
Schedules, account scope, and complaints live with the office. The crew leader in the field gets the work, the access notes, and a place to send back what the office needs. This handbook is the training standard. It is not the account file. Do not copy customer lists, prices, or pay into it, into a group text, or into a photo of a screen.
What the office owes the crew leader
A schedule that can be run: order of stops, what "done" means on a special visit, and access notes such as a gate or a dog.
A clear start authority. The crew leader punches the crew in or approves the start. The office does not tell a crew member to roll around the crew leader.
A decision on unplanned stops and on company-card use. If it was not approved, it was not approved. Unapproved card use is a serious violation.
A place for the weekly clean-truck photos to land, and a look at them the week they arrive.
What the crew leader owes the office
The visit is complete, or a straight report of what was not, the same day.
Anything that will become a call-back if it waits: a downed branch we did not haul, a mower that scalped, a door we could not clear in a storm.
The weekly clean-truck photos.
Resident requests, with a name, passed along without a price attached.
Complaints
The office takes the call. The crew leader corrects the work or explains what was in scope. We do not debate a client in the driveway, and we do not send a different crew to "smooth it over" without looking at the property. A call-back is logged as a miss against the visit, then it is fixed.
Do it right
Schedule, scope, and access notes are in the crew leader's hands before the hill.
Card use and extra stops have a yes from Operations or they do not happen.
Complaints come back to the office and the work gets corrected.
Avoid this
Prices, pay, or customer lists in a crew chat or in this book.
A route change shouted to a trimmer operator by a resident.
Ignoring the truck photos for a month.
Office / Sales
OFFICE ONLY Sales and the office use this page. Crews are not trained here. Do not show this page to a client, and do not read prices off anything you are holding. This book does not contain prices.
Sales handoff
Sales sells the work we already know how to do. The handoff to the crew leader is the scope and the access, not a rate.
Purpose and standard
A walkthrough describes the property in the same language as this handbook: turf, beds, edges, fall cleanup, mulch, and the snow areas. Sales does not promise a crew the same day unless Operations has the people and has said yes. Sales does not discuss crew pay with a client or with a crew.
Steps
Walk the property. Write what we will maintain: which turf, which beds, which walks, and, for snow, which entries, lots, and shelves.
Note access: gate, dog, where the truck parks, where snow must not go, and anything a crew leader cannot see from the street.
Match the promise to a standard in this book. If the client wants something we do not train — a new bed line every visit, spraying on a mow day, a price match — it does not go on the schedule as a surprise.
Operations puts the work on a crew leader's route. The crew leader gets scope and access. The crew leader does not get a sell price to carry in the truck.
If a client asks a crew member for a price anyway, the crew member uses the line in the crew leader standard and the office calls back. Sales does not text a number to the crew to "just tell them."
What stays out of the truck
Proposals, rate sheets, pay, and the customer list. The field carries the schedule and the standard. That split is intentional.
Do it right
Scope written in the words the crew already uses.
Access notes reach the crew leader before the first visit.
A same-day promise happens only after Operations agrees.
Avoid this
A price in a crew group text.
A service the handbook does not cover, dropped on a crew the morning of.
Telling a client the crew will "squeeze it in" with no route change.